>From what I've been reading so far from you guys, it seems the best way to make a hotbox is either from CA glue or matches... -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman Sent: Friday, January 15, 2010 11:43 AM To: pianotech at ptg.org Subject: Re: [pianotech] "Hotbox" for keeping soundboards dry David Love wrote: > Actually, I found the email that Ron posted and have attached the > drawing. Hopefully Ron doesn't mind. Nope, I don't mind. Wesley, I make no claims whatsoever as to the "best" way to build a hot box. This is what I had room for, and what I considered to be a workably efficient system with a reasonably safe heat source. For the discussion and details, check the archives. Ron N _____ avast! Antivirus <http://www.avast.com> : Outbound message clean. Virus Database (VPS): 100115-1, 01/15/2010 Tested on: 1/15/2010 4:35:00 PM avast! - copyright (c) 1988-2010 ALWIL Software.
This PTG archive page provided courtesy of Moy Piano Service, LLC