[pianotech] Conover 77

William Truitt surfdog at metrocast.net
Sat Jan 23 15:05:36 MST 2010


To the list:

 

I saw my first Conover 77 yesterday ( we don't see many Conovers here in the
Northeast).  Someone had given it to my customer, and it had not been tuned
for a very long time.  It had been restrung with a new block some time ago,
and the board shimmed.  Not the best rebuild, but serviceable.  I did a
couple of pitch raises and a fine tuning.

 

What a nice piano, even in the rough!   The tone was very focused and
present, with good clarity.  No killer octave in the mid treble, good
sustain and volume in the treble.  Overall, a solid citizen of the piano
world.

 

The piano is about a 5' 8".  The board has 15 ribs, and a small curved cut
off bar in the bass.  The root of the treble bridge is vertically laminated
oak.  26 bass, log scale on treble bridge.  Nicely laid out overall.  Good
bracing underneath.  Has a treble stiffening bar stretching from the belly
rail to the inner rim, like you see on Steinways over 6' 

 

Properly rebuilt with new hammers and strings, it could be very nice indeed.

 

Will Truitt

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100123/982066c7/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC