[pianotech] Loose Balance Rail Pins

[Floyd Gadd]

Hi Rex.  
You're welcome.  I believe I used 3 parts water to 1 part glue.
Floyd
Rex wrote:
Thank you for the good idea. I will look into doing that.
Rex Roseman

-----Original Message-----
From: Floyd Gadd [mailto:fg at floydgadd.com] 
Sent: Saturday, January 23, 2010 7:58 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] Loose Balance Rail Pins
Hi,
I ran into this when I replaced a set of corroded pins.  I glue-sized the
holes with a mixture of carpenter's glue and water--sorry, I forget the
proportions.  It made very loose pins fit well.
Floyd Gadd
Manitoba Chapter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100124/5bcd1ebb/attachment.htm>