Shouldn't be too hard to make out of hardwood, as were some in the older pianos. John Ross Windsor, Nova Scotia ----- Original Message ----- From: Claude Harding To: pianotech at ptg.org Sent: Monday, January 25, 2010 5:41 PM Subject: [pianotech] Kimball pedal bracket-Nylon/plastic Does anyone know where I can get replacements for the nylon or plastic pedal brackets found in many Kimball pianos? They are made in two pieces, a top and a bottom, holding all three pedal pins, and screwed into the bottom board with four screws. I have checked with Schaff, and they don't have them anymore. Nothing like that in the Pianotek catalog, either. Any suggestions appreciated. Claude Harding, RPT Dayton, Texas -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100125/0dc086ea/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC