Hi,Claude ! Jim Geiger has those replacement brackets ready to be shipped..Exact duplication,made out of maple ,makes easy repair.... Good luck ... Isaac On Jan 25, 2010, at 2:29 PM, Ron Nossaman wrote: > Claude Harding wrote: >> Thanks, Ron, Mike, & Dave, >> I thought about making a replacement. Only one part gives me >> pause, >> because I don't do a lot of router work. >> The groove that holds the pedal pins has to be just the right size >> and >> depth, and also aligned perfectly in the top and bottom pieces. >> That is the >> part that concerns me. Guess it's time for me to move forward in my >> woodworking skills. Wish me luck. >> Thanks. >> Claude Harding > > Thin blade in the table saw, kerf both pieces. clamp together, drill > screw holes, and run a drill the right size for the pedal pin > through the matched kerfs (guides). Ta-da! > Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC