Hi Everyone, I brought home a Harrington action to replace bridel straps. In the process, I had to reglue some jack posts to wippens. When I go to screw on teh wippen the jack lifts the hamer butt just fine. when the screw it tighten it is blocked up won't move at all. I checked the others where the bridel strap is not connected and they lift when I push up on the wippen . Why are these two wippens blocking? I didn't change the let off setting at all. Should I adjust let off on these notes? Thanks Marshall Marshall Gisondi Piano Technician Marshall's Piano Service pianotune05 at hotmail.com 215-510-9400 Graduate of The School of Piano Technology for the Blind www.pianotuningschool.org Vancouver, WA _________________________________________________________________ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/196390707/direct/01/ -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100128/71afc124/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC