Tokiwa makes both styles of backchecks for Steinway. One of those should fit easily. I used to recover backchecks but now opt just to replace. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Joe Wiencek Sent: Monday, May 10, 2010 6:10 AM To: pianotech at ptg.org Subject: [pianotech] Backcheck David, Thanks for the suggestion. I had thought to do that initially, but came up short when I was unable to find a similar backcheck from the supply houses. Would a different sized backcheck introduce geometry problems? The hammers I have set to install have already been bored, but neither tapered nor arced. Joe Wiencek
This PTG archive page provided courtesy of Moy Piano Service, LLC