Ron Thanks, I'll check my 'file' cabinet to see if I have something that will work. Bill -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman Sent: Saturday, May 22, 2010 12:39 PM To: pianotech at ptg.org Subject: Re: [pianotech] Bridal Straps Bill Costanzo wrote: > Thanks for all the responses, even the attempts at bridal humor. > > > > I think I'll try careful drilling first, and if that fails I may be > forced to use clip-ons. If you drill out first with a bit smaller than the hole (avoiding wood and glue), chuck a rat tail file in your drill, and feed into the hole in reverse so the teeth won't grab, you might get away with that instead. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC