Hi Everyone, I wanted to know what size screws would I use for a piano bench hinge for a Winter spinet. It's the brass plated bench with the three screw holes on each side of the hinge. I could take the existing screws out to see if the hard ware store can match them up but thought to avoid having this old hinge strip out etc. I'd just leave it alone. Thanks Marshall Marshall Gisondi Piano Technician Marshall's Piano Service pianotune05 at hotmail.com 215-510-9400 www.phillytuner.com Graduate of The School of Piano Technology for the Blind www.pianotuningschool.org Vancouver, WA -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101013/a930808f/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC