Joe, you just take a hot iron and move it around about a 1 foot area until the finish pops, then you move on. You break it off like pieces of plastic. The thicker the poly the easier it is to do. Al - High Point, NC On Feb 5, 2011, at 4:48 PM, Joseph Garrett wrote: > > Al said: > "Brian, that was my post and it does work by breaking the bond from the wood. If done properly it will not harm with wood." > > Al, > Could I impose on you to give a more detailed procedure? > Joe > > > Joe Garrett, R.P.T. > Captain of the Tool Police > Squares R I > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110205/aa3b5231/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC