Hi Ron, I knew they were out there... I have one that's a set width for one of my spray guns. Plus, I know there's a special one for doing the timing belt in my VW Jetta. So I KNEW there were some variations out there. It just took a little looking. Lots of them are too big for this application but there are a few... Hey, I know I rarely have much to contribute to the heavier posts anymore, but I still enjoy your thoughtful and sometimes humerous word crafting as well as the usual common sense - cut through the garbage posts you share. Thanks. :-) Brian > Date: Sun, 6 Feb 2011 10:53:47 -0600 > From: rnossaman at cox.net > To: pianotech at ptg.org > Subject: Re: [pianotech] spanner wrench? > > On 2/6/2011 9:36 AM, Brian Trout wrote: > > I haven't used this tool, but I think it's what you're looking for. And > > if you do some searching on the net, you can probably find a number of > > others like it. > > > > http://www.reidsupply.com/Detail.aspx?itm=AMF-259 > > Brian, > Cool, I hadn't seen one of these! Another hole in my education. > Thanks, > Ron N -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110206/83086868/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC