On Feb 14, 2011, at 7:30 PM, Douglas Gregg wrote: > I have used the drilling method on a couple pianos with success. One > was my own very old upright piano that I first treated by trying to > wick the CA through the bushing. It did not get to the pinblock but > sealed the bushing to the plate and pin and would not take more CA. … Hello Douglas, I wonder if the CA you used was truly thin. It's a real possibility all CA thins are not necessary alike. I now exclusively use super glues from Stewart-MacDonald http://tinyurl.com/ybx5vyf -- Keith McGavern, RPT http://www.ptg.org/chapters/oklahoma/ http://pianostuff.kamcam.com/
This PTG archive page provided courtesy of Moy Piano Service, LLC