The treble side arm is extended too far, and the treble side is the heavy side. And the tail arm is hardly extended.at all. Why not shorten the treble arm and extend the tail arm? Then make certain all the bolts are tight. Gordon Large, RPT Hallowell, Maine -----Original Message----- From: SooperTooner <SooperTooner at aol.com> To: pianotech <pianotech at ptg.org> Sent: Mon, Jan 10, 2011 10:46 pm Subject: Re: [pianotech] Uneven piano truck Looks to me that if you rotated it 120 degrees counter-clockwise it would be properly aligned. I think that the treble arm should be down at the tail end of the piano. Donn Young, RPT 610-964-8181 Devon, Pennsylvania On the web at www.FixPianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110110/060e6dad/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC