David, I don't have an "S" in my shop at the moment, but as best as I can recall, It does use a spring to retain the fallboard. Al - High Point, NC On Jan 11, 2011, at 12:59 AM, David Love wrote: > I guess I meant "who" can tell me... I didn't expect the piano to post. > > David Love > www.davidlovepianos.com > > > -----Original Message----- > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf > Of David Love > Sent: Monday, January 10, 2011 9:58 PM > To: pianotech at ptg.org > Subject: [pianotech] Steinway S and fallboard springs > > Does anyone have a Steinway Model S handy that can tell me if the fallboard > on that model typically uses those pressure springs to prevent it from > falling over too easily? > > David Love > www.davidlovepianos.com > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110111/c8e8e635/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC