I have found some really good info on refinishing in my local library, many of
which are for sale at my local Woodcrafters store. This includes videos.
Date: Wed, 12 Jan 2011 08:11:43 -0800
From: "Paul McCloud" <pmc033 at earthlink.net>
To: pianotech at ptg.org
Subject: Re: [pianotech] Using a burn in knife to repair lacquer
Message-ID: <380-220111312161143331 at earthlink.net>
Content-Type: text/plain; charset=US-ASCII
Some years ago I had a video from Mohawk that was excellent. I don't have
any contact info handy, but they probably have that video still available.
I bet if you check You Tube there will be plenty of stuff there too.
I do a lot of this type of repair. It's not that hard. If you have the
equipment and sticks, just make sure your knife isn't too hot, so use a
lamp dimmer to bring down the voltage. When you touch the knife to the
stick, it shouldn't bubble. Put burn-in balm (looks like vaseline) around
the area. Melt the stick into the hole. Level using the knife blade
across the hole. You can use a single-edge blade to scrape it level if you
like, but be careful not to scratch the area around the damage. Sand
level, match the sheen with steel wool or polish if it's higher gloss.
Black sticks never seem to match the black, it always looks grey-er, so
don't expect a perfect repair.
Have fun (yet?)
Paul McCloud
San Diego
> [Original Message]
> From: David Love <davidlovepianos at comcast.net>
> To: <pianotech at ptg.org>
> Date: 01/12/2011 7:07:30 AM
> Subject: [pianotech] Using a burn in knife to repair lacquer
>
> Does anyone know of a good pamphlet or instructional video on how to use a
> burn in knife to repair lacquer (black). I need to make a small repair
but
> finish stuff is not in my area of expertise.
>
> David Love
> www.davidlovepianos.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110112/ffe0e297/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC