On 11/10/2011 8:53 PM, Greg Newell wrote: > I'm confused here. It looks like you've drilled every one. How is that > somehow better or less time consuming than just flipping the piano over with > action removed and applying CA from the underside of the block? It seems to > me like a better way to apply too since you're putting the CA directly onto > the pin/block contact with little chance of gluing the block to the plate as > was described in a thread a bit ago. Suit yourself but, the very last place I want the pins tight is at the bottom of the hole. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC