David, I myself don't use clamps. The drill press table is made square to the drill. The key lays on the surface of the drill press table and I feed it into planer freehand. I clamp a gate to the drill press table to guide the key. A video of my process is located at the following web link: https://picasaweb.google.com/101597730368241784882/KeytopReplacement?authuser=0&authkey=Gv1sRgCIDOmIWX_crXEA&feat=directlink Chris S. -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121206/1b690de5/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC