[pianotech] How to analyze an existing tuning

[Euphonious Thumpe]

Terry is right, but for showing up and doing a quick pitch-raise pass on an obvious "beater", if you really want to know, you should get your trip's worth, anyhow. But if you want to try to check without a full tuning, check those pins that are A) closest together B) nearest the edge of the block 3) in the low bass. (Most likely to be loose.) And do a quick run up the keyboard for notes so out of tune that they might have "spinning pins", and check those. 

Thumpe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121219/468d54bb/attachment.htm>