Cement! From: "Dean May" <deanmay at pianorebuilders.com> To: <pianotech at ptg.org> Date: 01/11/2012 04:09 PM Subject: Re: [pianotech] gorilla glue Acetone is a solvent for it when wet, don’t know about after it dries. Just cut it off on the band saw or table saw. Dean Dean W May (812) 235-5272 voice and text PianoRebuilders.com (888) DEAN-MAY Terre Haute IN 47802 Give us a LIKE on Facebook! Go to PianoRebuilders.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of CHARLES BECKER Sent: Wednesday, January 11, 2012 2:51 PM To: PTG Subject: [pianotech] gorilla glue Hi List, A customer reglued an ivory head with Gorilla glue. No clamps.... Now the head is higher than its neighbors. Will a heated knife work to remove the head intact? Is there a good solvent? Thanks in advance, Happy New Year to all! Chuck Becker -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120111/bc3863df/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC