OR, ream the tuning pin holes in the plate and install (gasp!!) the narrow tuning pin bushings. Will Truitt -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman Sent: Friday, June 08, 2012 1:50 PM To: pianotech at ptg.org Subject: Re: [pianotech] S&S K(52) Restoration On 6/8/2012 12:43 PM, Gene Nelson wrote: > Removing the cantilever is definitely part of the plan. > Gene And ream the plate to get some clearance to keep the tuning pins off of the hole edge. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC