[pianotech] Advice on piano move

[tnrwim at aol.com]

Tom

My advice is to have the customer call Keyboard, Walters, or Modern, and ask them to move the piano. Keep the general movers completely out of the loop. It might cost a little extra, but it will assure that the piano gets there in one piece. Both companies are insured and bonded, and of course, know how to move a piano. 

Wim

 



-----Original Message-----
From: Tom Driscoll <tomtuner at verizon.net>
To: pianotech <pianotech at ptg.org>
Sent: Mon, Jun 11, 2012 2:39 pm
Subject: [pianotech] Advice on piano move


List,
 I received this email from a client relocating to the west coast from Massachusetts. He has a 7' Bosey about 30 years old. .This request is from a general moving company --not a piano mover
 
Hi Tom, 


I have been advised by the moving company that I should contact someone at Bosendorfer to crate the piano before the movers come (July 17). Do you have a contact there or anyone else to recommend?
 
 
 
Tom again : I think this is the mover covering his-her butt.
 I checked with my guy who has done business with Keyboard Carriage and Walter for long distance moves and crating has never been suggested. . In my opinion this puts my client is in a bind. If he says no to the crating they can say "told you so" if anything goes wrong and if he says yes to the crating it adds a ton of money and lots of extra handling to the process. 
 My mover has a place that will crate the piano but he said it's usually only done for overseas transport.
 The client would  have to move the piano to the crate shop then have the Van line pickup trhe piano there.A few years ago it was successfully moved from California to Ma. in the usual padded and strapped way.
 
Am I off base here? I know the piano has a high value but I'm just questioning the wisdom of all this .
 Opinions ?
 
Thanks,
 Tom D.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120611/b8591e6a/attachment-0001.htm>