Hi! I serviced a Betsy Ross spinet with a Wood Brooks 90 degree action today and I remembered that someone wrote in asking how to tighten the hammer flange screws. The screw is hidden under that jack. It's easily (well, kind of) tightened with a flange screw driver,( the one that shaped like a spade). You just move the jack over with the screw driver and tighten the screw. The jack and flange screw are in a plane parallel with keybed. Think of tightening an upright flange screw while the piano is tipped on it's back. Does that help? Laura Olsen,RPT 847-277-0778 www.ajoyfulsoundinc.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121016/88967d68/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_0672.jpeg Type: image/jpg Size: 51452 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121016/88967d68/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC