On 2/4/2013 11:06 AM, David Love wrote: > > I don't prefer to do the mating at final installation, as suggested in > another post, as I always find some cleanup to do and sometimes some squeeze > out into the tuning pin area underneath the plate. I prefer to clean that > up before I actually drill the holes for the tuning pins rather than risk > some squeeze out into a freshly drilled hole. The block is already fitted, so there's no need to pile on enough epoxy to squeeze into a plate hole, and the block isn't freshly drilled if you drill it in the piano just before stringing, as I do. What squeezes out underneath wipes up easily. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC