Is that what you're doing with new bridges and caps? If so, do you start the cut at the rear of the hole? Al - High Point, NC On Feb 23, 2013, at 11:37 AM, Ron Nossaman <rnossaman at cox.net> wrote: A point I've tried to make for many years is that the pin is and should be the termination, not the notch edge. The notch edge can only get in the way. Ron N -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130223/a323ffba/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC