It seems to me that the bolt should be reversed, with the washer and nut on the other side of the plate. In the present configuration I would presume that the bolt would interfere with the tuning hammer. Rhea Piano Service Tom Rhea, Jr., Technician (757) 373-0284 rheapiano at cox.net www.rheapiano.com _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Terry Farrell Sent: Wednesday, February 27, 2013 5:37 PM To: pianotech at ptg.org Subject: [pianotech] Pinblock Separation Repair Anyone care to speculate what is unusual about the pinblock separation repair pictured below? Terry Farrell -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130227/2a33f0c3/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 34057 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130227/2a33f0c3/attachment-0002.jpeg> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 39736 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130227/2a33f0c3/attachment-0003.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC