Naw....... Just tune the rest of the piano to the pitch of that string! ;-) Terry Farrell On Feb 27, 2013, at 6:01 PM, Tom Rhea, Jr. wrote: > It seems to me that the bolt should be reversed, with the washer and nut on the other side of the plate. In the present configuration I would presume that the bolt would interfere with the tuning hammer. > > Rhea Piano Service > Tom Rhea, Jr., Technician > (757) 373-0284 > rheapiano at cox.net > www.rheapiano.com > > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Terry Farrell > Sent: Wednesday, February 27, 2013 5:37 PM > To: pianotech at ptg.org > Subject: [pianotech] Pinblock Separation Repair > > Anyone care to speculate what is unusual about the pinblock separation repair pictured below? > > Terry Farrell > > > > <image001.jpg> > > > <image002.jpg> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130228/f913128e/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC