old Beckstein

[Fred Sturm]

Sambell, Ted wrote:
> 
-----
> Renner have an offset screwdriver in their catalog specifically made for
> Bechstein and similar designs in other makes, and it is the only tool I know
> which works on the rockers, because of the short height up to the bottom of
> the jacks. It has a steel tip about the size of a sugar cube with a 1/8"
> high blade on each of four faces appropiately angled.

I've purchased such an offset screwdriver at a local hardware. So it's
not that esoteric (ie, no need to get it from Germany). Just the right
tool for certain uses (haven't used it for rocker capstans myself).

Fred