Steinway damper ringing problem

Wimblees@aol.com Wimblees@aol.com
Wed, 17 Mar 2004 09:49:49 EST


---------------------- multipart/alternative attachment
In a message dated 3/16/04 8:59:49 PM Central Standard Time, A440A@aol.com 
writes:
One other thing that I have run into is a bass damper, usually a uni-chord, 
that has too much backward tilt.  This allows the proximal damper to sit off 
the string just enough to allow a much higher partial to sympathetically 
excite 
the bass string.  
  On a very slow lift, look for damperheads that rise at the front!  
Regards, 



Ed Foote RPT 
Thant's Ed. I'll take a look at that, too

Wim 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/22/9d/22/cd/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC