[CAUT] Today's Puzzler.

[michelle stranges]

I vote that the tube/channel the set screw taps into, to tighten the damper 
wire  is loose in the top of the underlever.

-OR- you've got a floppy damper wire in the guide rail which is very close 
to the plate because of the break and you're scared to shim it.





-or- Wim's being a party pooper.

:B
her

--On Thursday, March 17, 2005 3:59 PM -0500 Phil Bondi <phil@philbondi.com> 
wrote:

>
>
> michelle stranges wrote:
>
>>
>>
>> (is that where the break is??)
>
> It is..and if it wasn't for the break being in that exact location, I may
> still be looking for the problem. I actually stumbled onto the problem
> quite by accident..by thinking that the screw holding the damper wire was
> loose..and while I was tightening the screw(not loose), I found the
> problem.
>
>>
>> Unless I actaully see it sir, I can't really tell you exactly what's
>> wrong.
>
> That's the easy part..I can tell you exactly what is wrong..my problem is
> the solution to the problem..which appears to be asking for more trouble.
>
> -Phil
>
>
> _______________________________________________
> caut list info: https://www.moypiano.com/resources/#archives