Does Noxon leave residue as well? --Cy-- ----- Original Message ----- From: "Thomas Seay" <t.seay at mail.utexas.edu> To: "College and University Technicians" <caut at ptg.org> Sent: Tuesday, August 01, 2006 1:21 PM Subject: Re: [CAUT] Steinway Technical > I learned something interesting from a class in Rochester by David > Vanderlip. After polishing the pins with Flitz, he recommends > cleaning the pin with naptha before applying McLube. This removes > quite a bit of residue from the pin, which he says can become > somewhat gummy if not removed. I'm not sure if the stuff that's > removed is the "no residue" rust preventer or not, but there's sure a > lot of it, whatever it is. > > Try it and see how much gunk comes off the pins. You might be > surprised. I sure was. > > Tom >
This PTG archive page provided courtesy of Moy Piano Service, LLC