We have a Steinway M (c. 1960) here who¹s capstan line is askew significantly. The capstan on A0 is about 1/4² closer to the balance pin than the capstan on C8. The cap contacts the front of the wippen cushion on A0, and the back on C8. Dip at A0 is .420, dip at C8 is .390. I am planning on straightening this out this summer. My tentative plan right now is to remove a piece of wood from the keystick, about 1/2 x 1/2 inch, and glue in an insert for the new hole. I was thinking of using poplar for the insert. Since I¹m moving the hole such a short distance (max 1/8²), I wouldn¹t think simply plugging with a dowel and redrilling would work very well. Any comments, criticisms, or dire warnings? Thanks, Ken Z. -- Ken Zahringer, RPT University of Missouri School of Music -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060502/9963f48b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC