Just fill the holes with two part epoxy putty. David Love davidlovepianos at comcast.net -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Ken Zahringer Sent: Tuesday, May 02, 2006 7:01 AM To: College and University Technicians Subject: [CAUT] Capstan Repositioning We have a Steinway M (c. 1960) here who's capstan line is askew significantly. The capstan on A0 is about 1/4" closer to the balance pin than the capstan on C8. The cap contacts the front of the wippen cushion on A0, and the back on C8. Dip at A0 is .420, dip at C8 is .390. I am planning on straightening this out this summer. My tentative plan right now is to remove a piece of wood from the keystick, about 1/2 x 1/2 inch, and glue in an insert for the new hole. I was thinking of using poplar for the insert. Since I'm moving the hole such a short distance (max 1/8"), I wouldn't think simply plugging with a dowel and redrilling would work very well. Any comments, criticisms, or dire warnings? Thanks, Ken Z. -- Ken Zahringer, RPT University of Missouri School of Music -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060502/2c62cdad/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC