[CAUT] Scientific study - Stainless wire (Help!)

[Ed Sutton]

Jim-

Could you send me, or perhaps post to CAUT, the PureSound scale you use with an S & S M?

Thanks!

Ed Sutton
  ----- Original Message ----- 
  From: Jim Busby 
  To: College and University Technicians 
  Sent: Tuesday, August 28, 2007 11:49 AM
  Subject: Re: [CAUT] Scientific study - Stainless wire (Help!)


  Paul,

   

  Here I thought I was the only "crazy", but I'm finding more people coming out of the stainless closet! Peter Grey, back east, has done five Steinways, and we've done ten here. Ed has used the wire for historical instruments. I know of a few others who have done one or two.

   

  I would really like to know what pianos you have strung with stainless. Also, please let me know your experience with the wire. I'll be helping Juan with an article soon and would like more input from other technicians.

   

  I do have some old wire. Good thought.

   

  Thanks.

   

  Regards,

  Jim Busby

   


------------------------------------------------------------------------------

  From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Paul T Williams
  Sent: Tuesday, August 28, 2007 6:53 AM
  To: College and University Technicians
  Subject: Re: [CAUT] Scientific study - Stainless wire (Help!)

   


  I really like this question as I have used only the stainless since coming to UNL.  I used Mapes in the "private" world for 15 years and wonder know why I didn't go stainless sooner!   

  Also,Jim,  do you have some old wire in the corner of the shop somewhere?  Old vs. new wire might be another study... 

  Best, 

  Paul 





        Jim Busby <jim_busby at byu.edu> 
        Sent by: caut-bounces at ptg.org 

        08/27/2007 07:30 PM 

              Please respond to
              College and University Technicians <caut at ptg.org>
             

       To
             College and University Technicians <caut at ptg.org> 
             
              cc
              
             
              Subject
             Re: [CAUT] Scientific study - Stainless wire (Help!)
             

         

               
              
             

       




  Hi Jurgen, 
    
  You're right. I can't see why Americans don't use it, except that they haven't used it. I "went out on a limb" and experimented with it on one piano. Now after about 3 years I'll use it EVERY time I can! 
    
  I think the tuning stability has to do with the malleability that Daniel mentioned. It's absolutely amazing to me that it takes only two or three tunings on a newly strung piano and it's stable, ready to play without any "prepping" (bending, etc.) Besides the stainless factor I think this is the biggest reason why I use it. Instant stability. Good question. Thanks. 
    
  Jim Busby BYU 
    

   


------------------------------------------------------------------------------


  From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jurgen Goering
  Sent: Monday, August 27, 2007 5:09 PM
  To: caut at ptg.org
  Subject: Re: [CAUT] Scientific study - Stainless wire (Help!) 
    
  Hello Jim, 
  this sounds like a very worthwhile, interesting, and for me, exciting prospect. 
    
  As a believer in stainless wire for many different situations and applications, I am surprised it is so slow to get recognition in North America. 
    
  Among the things you mention, I wonder if there is any way to study how and why stainless wire attains such a high degree of tuning stability. 
    
  Jurgen Goering 
  Piano Forte Supply 
  (250) 754-2440 
  info at pianofortesupply.com 
  http://www.pianofortesupply.com 
    
    
  On Aug 27, 2007, at 14:48, Jim Busby wrote: 
  List, 
    
  We (BYU) finally are ready to do some scientific studies of stainless wire. This will be conducted by Physics professors/students here at BYU. Could any of you help me pose some "questions", "queries" or whatever you want to call it, for these studies? 
    
  One of our student piano technicians is doing his senior project and his professors (who we've bugged for years) are just now getting excited about this. 
    
  Here are some things I've thought of; 
    
  1 What are the actual differences in sound between stainless and Mapes or Roslau? (Spectrum, etc.) 
  2 What are the differences in inharmonicity between the two? 
  3 (how?) Do bass strings with stainless core sound different than other core? 
  4 etc.. 
    
  Jim Ellis, others, I'd really like some input on this. We have our ducks in a row so now is the time. 
    
  Thanks, 
  Jim Busby BYU 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20070828/423e5dba/attachment.html