For a while you could get things from GRK but the last time I called them about getting just an adjusting knob they didn't have it. dp David M. Porritt dporritt at smu.edu ________________________________ From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Aaron Bousel Sent: Saturday, February 17, 2007 9:53 PM To: caut at ptg.org Subject: [CAUT] Artist bench We have a few non-Jansen artist benches (old) around and I'm wondering if anyone knows anything who makes these things. The mechanism is quite simple, one long threaded rod held by two fixtures that always get loose. I've attempted repairs a couple of times but without much success, or, I should say, long term success. One of the benches has lost a piece of the mechanism. The department won't spring for a new Jansen bench. Does anyone know if these are still being made and/or if replacement parts are available? Thanks, Aaron ------------------------------------------ Aaron Bousel Registered Piano Technician, Piano Technicians Guild abousel at comcast.net (413) 253-3846 (voice & fax) -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20070219/0f362c38/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC