On Feb 17, 2007, at 10:52 PM, Aaron Bousel wrote: > We have a few non-Jansen artist benches (old) around and I'm > wondering if anyone knows anything who makes these things. The > mechanism is quite simple, one long threaded rod held by two > fixtures that always get loose. I've attempted repairs a couple of > times but without much success, or, I should say, long term > success. One of the benches has lost a piece of the mechanism. The > department won't spring for a new Jansen bench. Does anyone know if > these are still being made and/or if replacement parts are available? > > Thanks, > Aaron Sounds like you may be talking about a bench like I got from Schaff more than 20 years ago. A very heavy man sat on it about 10 years back and it hasn't been right since. Jeff Tanner, RPT University of South Carolina -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20070219/8146b4c1/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC