[CAUT] Lighter Touchweight

[Keith Roberts]

What is considered within the range of action spread? 112mm to 115mm? Or is
this completely determined by the rep levr window size and jack movement
needed?

Keith Roberts


On 10/20/07, David Love <davidlovepianos at comcast.net> wrote:
>
>  It is an effective way of making a small change in the leverage.
> Shimming out the wippen flange will also accomplish the same thing without
> having to move the stack.  As Jon mentioned, you do need adequate clearance
> in the balancier window.
>
>
>
> David Love
> davidlovepianos at comcast.net
> www.davidlovepianos.com
>
> -----Original Message-----
> *From:* caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] *On Behalf Of *Jon
> Page
> *Sent:* Saturday, October 20, 2007 7:47 AM
> *To:* caut at ptg.org
> *Subject:* [CAUT] Lighter Touchweight
>
>
>
> ...many of the options proposed are very dubious, in my view...
>
>
> Hey, don't knock stack relocation until you tried it. I've done it
>
> many times, even drastically on a new-ish S&S (out of warranty).
>
> --
>
>
> Regards,
>
> Jon Page
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20071020/09289bdd/attachment-0001.html