monkey hangerI had this happen once. If remember correctly, I couldn't figure out how to hold the wire in place while trying to resolder. Wound up ordering a new rod. By the time you figure your time and tools you'd have to buy.... Tanner ----- Original Message ----- From: David Ilvedson To: caut at ptg.org ; pianotech at ptg.org Sent: Wednesday, July 29, 2009 2:51 AM Subject: [CAUT] monkey hanger List, I have a Steinway B with a broken wire hanger that is soldered into the sost blade and attaches to the monkey. I have a pretty good idea on how to repair this...I've brazed copper pipes a bit...very little bit, but I imagine it is similar...? If someone has done this, a little advice would be appreciated... David Ilvedson, RPT Pacifica, CA 94044 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090730/8f387da7/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC