[CAUT] Action Rail Flange Cloth

[Paul T Williams]

Too late now, but good thought for next time!

Thanks
Paul




From:
"Mccoy, Alan" <amccoy at ewu.edu>
To:
CAUTlist <caut at ptg.org>
Date:
09/30/2009 04:27 PM
Subject:
Re: [CAUT] Action Rail Flange Cloth



The last several rails I have used string braid covered with beeswax that 
has been thinned with turpentine. Heat the wax to melt it, add a bit of 
TRPS (TRPS is the much-welcomed, less-smelly replacement for real 
turpentine) to thin the wax. Put the braid on the rail, and brush on the 
wax. Work fast. I’ve done it without the turpentine, but it was too thick 
for my taste.

Alan McCoy


From: <PAULREVENKOJONES at aol.com>
Reply-To: CAUTlist <caut at ptg.org>
Date: Fri, 25 Sep 2009 11:25:51 -0700
To: CAUTlist <caut at ptg.org>
Subject: Re: [CAUT] Action Rail Flange Cloth

David:

That's a reasonable thing to do which I have simply never found it 
necessary to do, but now will consider it to be in my arsenal of tricks. 
Thanks. And I should have said, "...is supposed to hold to flange in 
position...". :-)
 
 
Paul
 
In a message dated 9/25/2009 1:21:56 P.M. Central Daylight Time, 
dporritt at mail.smu.edu writes:

 

Paul:



You said “The  shape of the flange holds the flange in position.”  The 
shape of the flange sometimes holds the  flange out of position which 
makes us do strange things to align the  hammers in a given piano (gentle 
forcing the flange where it doesn’t want to  go, cross papering, etc.) 
When I have used sandpaper or emery cloth,  I’ve found that it helps this 
alignment (however you force it) to stay put  better.



dp



 

David M. Porritt,  RPT

dporritt at smu.edu <mip://01af4ad8/dporritt@smu.edu> 



 
 

From:  caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of  
PAULREVENKOJONES at aol.com
Sent: Friday, September 25, 2009 1:10  PM
To: caut at ptg.org
Subject: Re: [CAUT] Action Rail Flange  Cloth

 
 
 

The  purpose of the felt is to reduce impact noise in the rail. The shape 
of the  flange holds the flange in position. Sandpaper would be, probably, 
 inappropriate?
 
 

 
 
 

P
 
 

 
 
 
 

In a  message dated 9/25/2009 1:06:38 P.M. Central Daylight Time, 
reggaepass at aol.com  writes:
 

Anybody  use sandpaper for this application? 
 
 

 
 
 

Alan  Eder


-----Original Message-----
From:  PAULREVENKOJONES at aol.com
To: caut at ptg.org
Sent: Fri, Sep 25, 2009  10:51 am
Subject: Re: [CAUT] Action Rail Flange  Cloth
 
 
 

Paul:
 
 

 
 
 

We  used to use the Steinway provided black adhesive backed tape. Why pay 
the  price. The adhesive-backed brown nameboard felt available from any of 
the  other major vendors is quite inexpensive and does the same  thing.
 
 

 
 
 

P
 
 

 
 
 
 

In  a message dated 9/25/2009 12:34:13 P.M. Central Daylight Time, 
pwilliams4 at unlnotes.unl.edu  writes:
 

Hi  All, 

What do you all use for action rail flange cloth, or do you  just get some 
from Steinway or wherever...? 

This L I'm working on  is in bad shape. I took the old hammer flanges off 
today and the cloth  underneath literally disolved in my hands into dust. 
Has anyone used  stringing braid cloth? 

Thanks 
Paul 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20090930/d8c6b107/attachment.htm>