Thanks, Rob. Good advice. > I encounter the same problems with the Papps mute on grands, but >rather >than using rubber mutes, I fashioned two wedges from a block of >hammer felt that I have for shimming vertical hammer rails. The felt >is dense enough that you can cut it to shape, and sand the wedge to a >feather edge to get between the tightest trichords. Also, I made the >wide end of the wedge thick enough to snugly fit between an outside >string and a plate strut at the end of a stringing section. Not a >Papps mute, but they work fine (lightweight, too) > >Happy Tuning, 8-) >Rob Kiddell >C.A.P.T. Student >P.T.G. Associate >Edmonton, Canada >http://www.planet.eon.net/~atonal/atonal.html
This PTG archive page provided courtesy of Moy Piano Service, LLC