shift pedal

[JIMRPT@aol.com]

Bill;
  For your shift lever on the 'A', try PianoDisc. They recently purchased M&H
and may be willing to supply parts. Or call Ed at APSCO he might have one
floating around.
  A suggestion for your sanity; when you install the new shift lever put in a
stop between the shift lever and keybed-adjust the height to allow full
motion of the shift lever and keyframe without placing unsupported stress on
the lever (no more broken levers but probably if the customer insists on this
practice you will then have an occasional bent pedal)
Jim Bryant (FL)