VJ LUBE RECIPE

scott.e.johnson@24stex.com scott.e.johnson@24stex.com
Fri, 23 Aug 1996 20:20:36 -0800


 One thing I can't remember, does the talc need to be the
 At> unscented type or does it matter?

 At> VJ Lube

 At> 1 part pure Lanolin
 At> 1 part petroleum jelly
 At> Talc

 At> Heat in a coffee can in a pan of water until it's turned to
 At> liquid. Add as much talc as it will absorb.
 At> Store in the small film containers.


 At> Avery Todd, RPT
 ________________________
 Yes I have always heard unscented talc. I go to a good old fashion drug store,
 better hurry before they are all gone, and buy a 1 lb. container of unscented
 talc, 1 lb. anhydrous lanolin and 1 lb. petroleum jelly.

Scott Johnson
Auburn, California
scott.e.johnson@24stex.com

___ Blue Wave/DOS v2.21 [NR]




This PTG archive page provided courtesy of Moy Piano Service, LLC