In a message dated 96-08-29 17:38:32 EDT, you write: << >Paul Dempsey asks about key bushing leather in verying thickness. I, too, >use the material from Pianotek. I size it to the thickness I need using a >jig and a drum sander on my drill press. This seems to do the job very >nicely. The same can be done with bushing cloth. I have come to prefer the >leather even though it is a bit more expensive. > >Paul Stephens, RPT _____________________________________ Avery Todd, RPT Moores School of Music University of Houston Houston, TX 77204-4893 713-743-3226 atodd@uh.edu ____________ >> Thank you Avery, Doug Hershberger
This PTG archive page provided courtesy of Moy Piano Service, LLC