Try the February 1990 Piano Technicians Journal. There's a full description of the double-file on page 22. Ted Simmons, Merritt Island, FL ><< After removing the felt on a set of keys, I discovered that the WOOD on > the sides of the front rail mortises were slightly concave. Heretofore, > I'd only observed that shape because of the compressed felt. > > I would appreciate any suggestions as to how I should proceed before > installing new felt. > >> > >Bill Spurlock has developed a method using two files glued together, with >veneer between to make them the right thickness. I believe it was in the >Journal at one time in his articles on rebushing. If you can't find it there, >you could e-mail him to find out if it is in his brochure on rebushing. > >Hope this is helpful. > >John Elving, RPT >Sacramento, CA
This PTG archive page provided courtesy of Moy Piano Service, LLC