>...With the small blade of my pocket knife I unglued the felt from >the back of the jack slot and pushed it forward. I selected a front rail >punching of correct thickness and cut a square to fit the slot, put glue >on both sides, and with small tweezers put it in place. Used the jack to >push the felt firmly against the punching. Worked fine and eliminated >the "wacking " noise... > >If some of you have other ways of handling this problem would appreciate >hearing from you. > >Travis Gordy Looks like you cam up with an excellent solution, Travis. Congratulations! Keith A. McGavern kam544@ionet.net Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild Oklahoma Baptist University Shawnee, Oklahoma, USA
This PTG archive page provided courtesy of Moy Piano Service, LLC