JIMRPT@aol.com (Jim Bryant) wrote: > -snip- > Four methods of acheiving that fixing in place are: > 1. CA glue (which I believe Joel said would not work and he is probably > right, although I don't know enough about the different formulations of CA to > say for sure) -snip- Wasn't me. I don't know if CA will work or not. I just contributed my experience of soldering the stirrup since that is the way se did it in the factories when we built the sostenuto rod from scratch, so to speak. ----Joel
This PTG archive page provided courtesy of Moy Piano Service, LLC