---------------------- multipart/alternative attachment "Paul S. Larudee" wrote: > Ron Nossaman wrote: > > > I wonder how one would go about measuring longitudinal partials anyway. Can > > this be done with an ETD? If so, someone could set it up fairly easily and > > whack the bejeebers out of a string to get a first hand look at what happens > > to the pitch of the longitudinal. Where are our instrumented experimenters > > out there? > > > > Ron > > I agree that experimental studies are the only way to go any farther, > but I have a feeling there aren't too many grants to be had for this > sort of research - at least not with pianos as the main application. > Hope I'm wrong. Nice discussion, though. Anyone else have any ideas? > > Paul One thing we can all do is mail the three biggies Reyburn, Sanderson, and Tom and ask them to include more features in these products use as measuring devices. String partials should be able tobe measured in cents (in both the Sat III manner and in the manner Reyburn uses) and hz, (for some purposes hz are handy) and the data should be able to be exported in ascii format for use in spreadsheets / math graphics programs. Tune Lab is the only one of the three so far to have this option and its only in cents. (which admitedly has more uses then hz for our purposes, still the extra option of having hz would be nice) Richard Brekne ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/77/fe/22/92/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC