Rig a Gig Gig

[Roger Jolly]

Thank's Joe.
Roger


At 05:46 AM 07/09/99 -0600, you wrote:
>Hi Roger,
>I also am getting impatient so I went down to the shop last Saturday and
>they were off for the day. Since school has started for me I phoned
>yesterday and left a phone message for them to call and let me know of
>their progress.
>Depending how far along they are, In will either ask them to send the jig
>to you or wait a week for them to finish with the model.
>Joe Goss
>
>----------
>> From: Roger Jolly <baldyam@sk.sympatico.ca>
>> To: pianotech@ptg.org
>> Subject: Re: Rig a Gig Gig
>> Date: Sunday, September 05, 1999 10:03 PM
>> 
>> Hi Joe,
>>            Just wondering how things are going, and to inquire when you
>> will be sending my right handed jig. I will be  needing it in the near
>future.
>> Regards Roger 
>> 
>> At 07:40 AM 26/07/99 -0600, you wrote:
>> >Hi Roger,
>> >I have been studying the hammer tail device you gave me to develop.
>> >As I look at it it seems to me that a slight change would enable one to
>> >make the two mirror images into one gig on the same base. I am thinking
>> >that if one changed the angle adjustment screw that is on the side to a
>> >slotted slider that moved in a slot in the front of the tool, the mirror
>> >image could be back to back on the same base with two holddowns and two
>> >slider adjustments on the  opposite sides of the tool that hold the
>hammer.
>> >Please let me know what you think about this idea. 
>> >You can call me at 1 800 343 5257 if you wish to talk directly to me or
>by
>> >email.
>> >Joe Goss
>> > 
>> Roger Jolly
>> BaldwinYamaha Piano Centre
>> Saskatoon and Regina
>> Saskatchewan, Canada.
>> 306-665-0213
>> Fax 652-0505
> 
Roger Jolly
BaldwinYamaha Piano Centre
Saskatoon and Regina
Saskatchewan, Canada.
306-665-0213
Fax 652-0505