Jon Page wrote: > > It would be so much easier if a slot were cut in the bottom of the post so a > screw driver could simply turn it back out from underneath. > > But that would make things too convenient. > Now that you mention it, Jon, why not have the agraffes sit in through holes (not threaded) fastened with nuts on the bottom. You would align the agraffes with the agraffe tool (chucked in the T-handle) while tightening the nuts below with a socket wrench. No reaming necessary. Tom -- Thomas A. Cole, RPT Santa Cruz, CA mailto:tcole@cruzio.com
This PTG archive page provided courtesy of Moy Piano Service, LLC