Hi Ron, <snip>...broke the corner off the keybed of a little Baldwin console. <snip> The keybed material was something that looked like pressed flaked cardboard, a sort of low grade masonite.<snip> Dang, I didn't know anyone was making keybeds out of that kind of stuff. Hope I never have to fix one! Brian T. ----- Original Message ----- From: "Ron Nossaman" <RNossaman@KSCABLE.com> To: <pianotech@ptg.org> Sent: Monday, June 05, 2000 9:33 PM Subject: Re: Cracked Keybed > >There might be a few more options that might work. The way it's broken out > >can make a difference how it can be repaired. > > - or IF it can be repaired. Years back, a rather infamous local moving > company > Durham's Rock Hard Water Putty in the break, and a sheet of pressure > sensitive adhesived veneer on the bottom, applied by their brother in law > furniture fixer, didn't work all that well. I don't think anything would > have. The keybed material was something that looked like pressed flaked > cardboard, a sort of low grade masonite. Anybody know what this stuff was? > It had apparently worked just fine as a keybed for umpteen years, but once > broken, didn't leave much to glue back together. There are probably a whole > bunch of them still out there and still doing just fine in their unbroken > condition, but I ended up making a new keybed by stacking a couple of > sheets of Baltic Birch plywood to the appropriate thickness and replacing > this one. > > Aside from that, I'd probably go with routing and inlay like Brian suggested. > > Ron N >
This PTG archive page provided courtesy of Moy Piano Service, LLC