Balwin 6'3"

Jon Page jonpage@mediaone.net
Sun, 26 Mar 2000 08:16:32 -0500


At 09:54 PM 03/25/2000 -0600, you wrote:
>Nose bolt block was not split.  I found it because after the break I
>checked. Too late. Turned by hand, holding nothing. It now has a new
>hard maple block epoxied in place. 

New block. eh.

So the bolt was removed at some point either in a rebuild or while it was
strung.
If it was strung, no tension dropped; that could stress the strut. Was the
bolt
reinstalled to the correct height?



Jon Page,   piano technician
Harwich Port, Cape Cod, Mass.
mailto:jonpage@mediaone.net
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


This PTG archive page provided courtesy of Moy Piano Service, LLC